while(1)
    {
        LED1 = 0;           // turn LED on
	LED2 = 0;           // turn LED on
        __delay_ms(500);	// warte halbe Sekunde 
        LED1 = 1;           // turn LED off
        LED2 = 1;           // turn LED off		
        __delay_ms(500);	// warte halbe Sekunde
    }

void servoRotate90() //90 Degree
{
    GPIO != 0x03;         // beide 1
    __delay_us(1500);     // pulsdauer
    GPIO &= 0xFC;         // beide 0
}

/*******************************************************************************
 * File:        main.c
 * Project:     SP18 - Hello World 
 * Author:      Nicolas Meyertöns
 * Version:     siehe main.h
 * Web:         http://pic-projekte.de
 ******************************************************************************/

#include <xc.h>

#define LED1        LATBbits.LB1
#define _XTAL_FREQ  2000000 
#define LED2        LATBbits.LB5 
#pragma config FOSC = INTIO67       // Internal oscillator block
#pragma config PWRTEN = ON          // Power up timer enabled
#pragma config BOREN = OFF          // Brown-out Reset disabled
#pragma config WDTEN = OFF          // Watch dog timer is always disabled
#pragma config MCLRE = EXTMCLR      // MCLR enabled
#pragma config LVP = OFF            // Single-Supply ICSP disabled

/*******************************************************************************
 * Diverse Einstellungen zum PIC (IO, Takt, ...)
 */

void initPIC(void)
{
    TRISA = 0x00;
    TRISB = 0x01;                   // RB0:Input (PB)
    TRISC = 0x20;                   // RC6:Input (AN16)

    ANSELA = 0x00;                  // All digital
    ANSELB = 0x00;                  // ...
    ANSELC = 0x20;                  // AN16 on

    OSCCON2bits.MFIOSEL = 0;        // 111: 16 MHz
    OSCCONbits.IRCF2 = 1;           // 110:  8 MHz
    OSCCONbits.IRCF1 = 0;           // 101:  4 MHz
    OSCCONbits.IRCF0 = 0;           // 100:  2 MHz <-- aktiv
}

/*******************************************************************************
 * Main Routine
 */

void main (void)
{
    initPIC();
    
    /*Shut OFF the LCD-Backlight*/
    LATCbits.LC2 = 1;
    
    /*Endlosschleife*/
    while(1)
    {
        LED1 = 0;           // turn LED on
        __delay_ms(250);    // delay 250 ms
        __delay_ms(250);    // ...
        LED1 = 1;           // turn LED off
        __delay_ms(250);    // ...
        LED2 = 0;           // turn LED on
        __delay_ms(250);    // delay 250 ms
        __delay_ms(250);    // ...
        LED2 = 1;           // turn LED off
        __delay_ms(250); 
    }
}[code]/*
 * File:   newmain.c
 * Author: Herbert
 *
 * Created on 12. Oktober 2019, 17:26
 */


#define _XTAL_FREQ 8000000

#include <xc.h>
#pragma config FOSC = INTOSCIO        // Oscillator Selection bits (HS oscillator: High-speed crystal/resonator on RA4/OSC2/CLKOUT and RA5/OSC1/CLKIN)
#pragma config WDTE = OFF       // Watchdog Timer Enable bit (WDT disabled)
#pragma config PWRTE = ON       // Power-up Timer Enable bit (PWRT enabled)
#pragma config MCLRE = OFF      // MCLR Pin Function Select bit (MCLR pin function is digital input, MCLR internally tied to VDD)
#pragma config CP = OFF         // Code Protection bit (Program memory code protection is disabled)
#pragma config CPD = OFF        // Data Code Protection bit (Data memory code protection is disabled)
#pragma config BOREN = OFF      // Brown Out Detect (BOR disabled)
#pragma config IESO = OFF       // Internal External Switchover bit (Internal External Switchover mode is disabled)
#pragma config FCMEN = ON       // Fail-Safe Clock Monitor Enabled bit (Fail-Safe Clock Monitor is enabled)





void servoRotate0() //0 Degree
{
  unsigned char i;
  for(i=0;i<50;i++)
  {
      GP1 = 1;
      __delay_us(800);
      GP1 = 0;
    __delay_us(19200); 
      GP0 = 1;
      __delay_us(800);
      GP0 = 0;
    __delay_us(19200);
  }
}


void servoRotate90() //90 Degree
{
  unsigned int i;
  for(i=0;i<50;i++)
  {
    GP1 = 1;
    __delay_us(1500);
    GP1 = 0;
    __delay_us(18500);
     GP0 = 1;
    __delay_us(1500);
    GP0 = 0;
    __delay_us(18500);
  
  }
  
}

void servoRotate180() //180 Degree
{
  unsigned int i;
  for(i=0;i<50;i++)
  {
    GP1 = 1;
    __delay_us(2200);
    GP1 = 0;
    __delay_us(17800);
    GP0 = 1;
    __delay_us(2200);
    GP0 = 0;
    __delay_us(17800);
  }
}


void main()
{
    OSCCON = 0b00000000;
    OSCCONbits.IRCF = 0b111;
          
  TRISIO = 0x00; // PORTB as Ouput Port
  do
  {
    servoRotate0(); //0 Degree
    __delay_ms(2000);
    servoRotate90(); //90 Degree
    __delay_ms(2000);
    servoRotate180(); //180 Degree
  }while(1);
}